|Use:||Sheet||Place of Origin:||Guangdong,China|
|Weight:||225kg||Certification:||CE and ISO|
|Warranty:||1 Year||Material thickness:||0.2-3.0mm|
|Material width:||0-200mm||Feed length:||99999.99mm|
|Color:||Customize||Servo motor:||Japan yaskawa|
|Feeding direction:||Customize||PLC:||Japan Mitsubishi|
|Feeder roller:||Two roller||Packaging details:||Wooden box|
|Supply Ability:||1 Set/Sets per Month||Delivery detail:||telephone conversation|
|After-sales Service Provided:||Field installation, commissioning and training||Port:||Shenzhen/guangzhou port|
1. Advanced automatic diagnosis system, when the operation is faulty, the system can self-diagnose and display the error information in detail.
2. It has two feeding modes of inching and continuous feeding. It can be mixed operation, X-axis (single-axis) can work independently, or X-axis and Y-axis can be linked together, and it can also be alternately fed in two axes. saving material costs.
3. High precision: In the continuous feeding process, the minimum distance between the sides and the side can be set within 0.4mm, and the movement error of each time can be guaranteed within ±0.05mm.
4. Material reference points can be set for easy operation.
5. when the belt is used, no gap is produced.
6. During the feeding process, the material is automatically repositioned, one-button operation, convenient and fast.
7. Equipped with internal software limit function, with over-travel and overload protection, which greatly reduces the production failure.
|NCFJ Coil Servo Feeder Machine Specification|
Test And Debug:
1.Run straightener and decoiler, and the strip input to feeder slowly.
2.Adjust 2 guide roller of the feeder and make it close to the strip but not touch the strip.
3.Release the upper roller by manual touch screen, and make the strip go inside between upper roller and down roller, then clamp the strip by manual touch screen, and then change to auto model.
4.The adjustment spring is for adjusting the upper roller pressure to make sure the material can be pressed tightly by upper roller. After adjust the spring, the strip should not be slip. If the material thickness is more thick, the pressure should be bigger a little.
5.After the feeding pitch set, set the feeding speed. The detail setting refer to the following instruction.
6.After set all the parameter, the set length maybe have a little difference from the actual feeding length, it need to be amendment by manual. Press feeding test, and check the actual feeding length difference, adjust the setting and then check the difference, and so on, till to get a good actual feeding length.
7.When the guide pin of mould go into the guide pin hole, turn the press cam group signal switch, adjust the roller to release status, after press turn 15°,the roller can clamp. General the release angle (press turn angle) is from 165°to 185°.
8.The feeding start angle adjust is by turn the cam to achieve. The feeding start signal is the angle position of press cam running, the suggest angle is 270º-360º.
9.After set the mould, single punching to test the mould, and then turn to auto model for continuously production.