|Use:||Sheet||Place of Origin:||Guangdong,China|
|Weight:||920kg||Certification:||CE and ISO|
|Warranty:||1 Year||Material thickness:||0.2-3.0mm|
|Material width:||0-800mm||Feed length:||99999.99mm|
|Color:||Customize||Servo motor:||Japan yaskawa|
|Feeding direction:||Customize||PLC:||Japan Mitsubishi|
|Feeder roller:||Two roller||Packaging details:||Wooden box|
|Supply Ability:||1 Set/Sets per Month||Delivery detail:||telephone conversation|
|After-sales Service Provided:||Field installation, commissioning and training||Port:||Shenzhen/guangzhou port|
1. It adopts 7-inch super large Mitsubishi touch screen control, and has dual control modes of buttons and touch screens. The screen indication is clear, and the operation is very simple.
2. The PLC operation panel is in the independent electric box, which completely avoids the negative impact of the punch vibration on the accuracy of the feeder and ensures high-precision feeding.
3. The yaw type NC feeder is equipped with a memory function. When the feeder is suddenly powered off or the production needs to be interrupted due to special circumstances, the program does not need to be re-measured when restarting the production. Just press the reset button to re-operate. Streamlined operational procedures.
4. It has two kinds of relaxation methods: relaxing at both ends and relaxing one by one. It can realize multi-purpose for one machine and is suitable for different stamping processing.
5. configure the production value setting function, simple to achieve quantitative production, high degree of automation, operation is extremely simple.
6. feeding speed setting is simple, acceleration and deceleration can be adjusted freely on the touch screen.
|NCF Coil Servo Feeder Machine Specification|
1.Drill and tap 4pcs screw hole at the side of press machine which you want to install the feeder. The position of 4 hole should match with the installation plate hole dimension.
2.Installing the install plate to the power press machine.
3.Hang the feeder body. Made the key slot in the fixing plate and the installation plate to match with the key, and then fix the feeder in the installation plate with the screw.
4.Fix the mould, ensure the mould is vertical to the roller, and install the release device in slide of press machine.
5.Install control box and approach switch to the suitable position of press machine and then check whether it’s work normal.