JM3-200Automatic Coil Feeder3In1 NC Coil FeederCoil FeederAutomatic Coil主页5

Automatic Coil Feeder Thin Coil Leveler Machine For Aluminum

  • Model:JM3-200
  • Minimum Order Quantity: 1 Set
  • Payment Terms: TT, L/C, D/A, Etc

Product Details

Quick Details
Condition:NewType: Straightener
Use:Thin coilPlace of Origin:Guangdong,China
Brand Name:JiedaVoltage:380V/Customize
Power(W): 2.5KWDimension(L*W*H): 880*900*1200mm
Weight:410kgCertification:CE and ISO
Warranty:1 YearMaterial thickness:0.3-1.2mm
Material width:0-200mm Function:Straighten coil material
Color:CustomizeMotor: 1hp
Straightener method:Four-point independentMaterial:Coil material  
Max speed:0-16m/minMarket:Global
Straightener roller:Upper9/lower10Packaging details:Wooden box
Supply Ability:10 Set/Sets per MonthDelivery detail:telephone conversation
After-sales Service Provided:Field installation, commissioning and training Port:Shenzhen/guangzhou port

Product Application:
1. To understand the function of the Automatic Coil Feeder, which is suit for straightening the material thickness. taking this as an example, the maximum straightening material thickness of the model is 3.0mm for metal sheet, the minimum material thickness is 0.4mm, and the maximum straightening width is 200mm when the material thickness is 1.0mm, and the maximum straightening width is 3.0mm 150mm; as the material widens, the material thickness decreases. if it exceeds the above range, the straightening effect will be unsatisfactory! It can even cause serious damage to the machine
2. It is also necessary to know the reference position of the precision straightener before operation: the straightening adjustment needs to refer to the dial indicator installed on the cover to adjust. the dial indicator has been debugged before leaving the factory, and the adjusted reference value is 5.0. that is, the short needle points to 5, and the long needle points to 0. at this time, the lowest point of the upper roller coincides with the highest point of the lower roller. the dial indicator is relatively precise. do not disassemble or bump it.
3, Product test machine adjustment: the thickness of the product needs to be straighened. turn the straightening adjustment handwheel counterclockwise until the short hand points to the position of 5+ product thickness (product thickness is 2mm, the hand points to 7 and the long hand points to 0). rotate the handwheel to adjust the material thickness and pull the upper roller to a proper position. it is easier to feed. push the arc of the product into the machine by pressing ⌒. press the manual forward rotation to send the product out of the machine. if the radian is still the same as before, it means that the pressure of the upper roller is not enough. turn the four straightening adjustment handwheels clockwise for half a turn, and then put the product into the machine to straightening. follow the above steps until the product is level. If the radian of the product becomes low, it proves that the upper roller is pressed too much, and the straightening adjustment handwheel must be adjusted in the opposite direction. try again with another product until the product is straightened. two straightening handwheels at the feed end will adjust the multi pressure point of the handwheel, and two straightening handwheels at the discharge end will effect the less pressure point of the handwheel. adjustment experience: adjust the position of the material inlet and outlet to the position of 5 + material thickness, and then the material outlet does not move. then, slowly adjust the handwheel at the material inlet until the product is straight
4. Automatic Coil Feeder operation of the machine: after debugging, you can turn the button to the automatic position to allow the machine to run automatically. place the product to be straightened on the auxiliary pallet, and gently push it to the position of the feeding roller by hand, and the roller will automatically move it. the clamp is fed into the straightening part, and after straightened, it automatically comes out at the discharge end and drops the stainless steel pallet. the machine must be operated safely! do not wear gloves, hand jewelry, etc. to operate the machine.

JM3 Thin Coil Straightener Machine Specification
Model JM3-100JM3-200JM3-300
Material width(mm) 100200300
Material thickness(mm)0.3-1.20.3-1.20.3-1.2
Straightener rollerUpper9/lower10Upper9/lower10Upper9/lower10
Straightener mehod Four-point independent
Straightener Speed(m/min)161616
Motor(hp)1 11.5
Straightening directionLeft-rightLeft-rightLeft-right
TAGS:Hydraulic Steel Coil Uncoiler Automatic Coil Feeder

Related Products

Copyright © 2006 - 2021 Dongguan Jieda Machinery Co.,Ltd Servo Feeder Machine coil feeder line