Servo Feeder

Servo Roll Feeder handle operation instructions

The Servo Roll Feeder of Dongguan Jeda Machinery adopts the operation mode of touch screen and handle dual control, and is equipped with an independent handheld remote control box, which is convenient for customers to control the inch in, inch and retreat of the NC servo feeder of the punch press and the rack more quickly during mold trial. Part of the function of tightening, shrinking, etc., can observe whether the material feeding is in place while operating, and realize high-efficiency automatic production safely and quickly

Operation instructions of the handheld remote control box:

Each Servo Roll Feeder of Dongguan Jieda Machinery is equipped with 2 hand-held remote control boxes, one of which is a material rack spindle operating handle and one is a servo feeding operating handle.

The function description of the components of the handheld remote control box:Servo Roll Feeder handle operation instructions

1. Servo feeding operation handle: Servo Roll Feeder jog operation, single action and material pressing operation mode selection knob: for convenience of use, the handheld remote control box has 3 functions of jog operation, single action operation and material pressing. When the knob is located In the jog operation mode, operate the 2 buttons below it to control the feeding of the three-in-one NC servo feeder of the punch press. Servo jog feeding and jog withdrawal. When the knob is in the single action mode, the start button below it can be controlled. One stroke of the feeding servo. When the knob is in the pressing mode, operating the loosening and clamping button below it can control the opening and closing of the leveling feeding roller

2. Spindle operation handle (with trolley): Three-in-one NC servo feeder for punch presses, trolley operation and spindle operation mode selection knob: For convenience, the handheld remote control box has trolley up and down operation, trolley forward and backward, and spindle up There are three functions of tightening and shrinking. When the knob is in the trolley (left) mode, operating the two buttons below it can control the up and down of the trolley. When the knob is in the spindle running mode, operating the start button below it can control the tension of the spindle. With contraction, when the knob is in the trolley (right) mode, you can control the trolley to move forward and backward by operating the two buttons below it.

3. Spindle operating handle (without trolley): Press to tighten, the main shaft of the Servo Roll Feeder material rack expands, and press to contract, the main shaft shrinks


TAGS:Servo Roll Feeder

Related Products

Copyright © 2006 - 2021 Dongguan Jieda Machinery Co.,Ltd Servo Feeder Machine coil feeder line